Research Groups

  • AG
    • img
    • img
    • img

    Research Description

    The Material Interfaces group at IITGN, which is lead by Prof Abhay Gautam and Prof Pradipta Ghosh, studies in the area of Interface Structure and Dynamics. For this, the team extensively use Physical Vapor Deposition (PVD) systems and Transmission Electron Microscopy based techniques among others. The team works on the following areas of research including; Solid Interfaces Structure, Interface Thermodynamics and Kinetics, and Grain Boundary Dynamics. The group currently have the following research facilities like PVD, LEED, AES, and Arc Melting units.

    Materials Interfaces

    PI: Dr. Abhay Raj Singh Gautam

    • Work Experience:
    • Associate Professor, Materials Engineering
    • Assistant Professor, Indian Institute of Technology Gandhinagar (Oct 2014 to Sep 2023)
    • Postdoctoral Fellow, Lawrence Berkeley National Lab, (Apr 2009 - Sep 2014)

    • Education:
    • BE: University of Roorkee, 2000
    • MS: University of Alabama, Birmingham, 2003
    • Ph.D.: University of Virginia, 2009

    • Contact Details:
    • Email: agautam -AT- iitgn.ac.in
    • Office: AB 11/306 C
    • VOIP: 2477

    • Research Interests

      • ● Interface structure and dynamics

    Recent Publications

    1. Gautam A, Howe JM (2013) "A Method to Predict the Orientation Relationship, Interface Planes and Morphology Between a Crystalline Precipitate and Matrix: Part II - Application" Philosophical Magazine, 93 (25) 3472-3490.
    2. Gautam A, Ophus C, Lançon F, Radmilovic V and Dahmen U (2013) "Atomic Structure Characterization of an Incommensurate Grain Boundary" Acta Materialia, 61(13) 5078-5086.
    3. Gibb AL, Alem N, Chen J-H , Erickson KJ, Ciston J, Gautam A, Linck M, and Zettl A (2013) "Atomic Resolution Imaging of Grain Boundary Defects in Monolayer Chemical Vapor Deposition Hexagonal Boron Nitride" Journal of the American Chemical Society, 135(18) 6758-6761.
  • AM
    • img
    • img
    • img
    • img
    • img

    Research Description

    The Antimicrobial Materials Group, under the leadership of Professor Abhijit Mishra, specializes in studying the mechanism of action of membrane-active peptides, such as cell-penetrating and antimicrobial peptide-mimics, as well as antibacterial polymers. Their research aims to understand these mechanisms and apply the knowledge to various applications. The group utilizes a range of facilities including laminar hoods, incubators with and without shakers, a lyophilizer, centrifuges, probe and bath sonicators, fluorescence microscopes, and microplate readers. Additionally, they have access to a Leica SP8 Laser Scanning Confocal Microscope equipped with multiple laser lines and four detectors for simultaneous detection, z-stacking, image reconstruction, and live-cell imaging.

    Biomolecular Materials Science Group

    PI: Dr. Abhijit Mishra

    • Work Experience:
    • Associate Professor, Materials Engineering
    • Assistant Professor, Indian Institute of Technology Gandhinagar (July 2011 to Jan 2019)
    • Postdoctoral Scholar, University of California Los Angeles (July 2010 to Jun 2011)
    • Research Assistant, University of Illinois Urbana Champaign (Aug 2003 to May 2010)

    • Education:
    • BTech: IIT Bombay, 2003
    • Ph.D.:University of Illinois at Urbana Champaign, 2010
    • Google Scholar: https://scholar.google.co.in/citations?user=ain_zCQAAAAJ&hl=en

    • Contact Details:
    • Email: amishra -AT- iitgn.ac.in
    • Office: 11/309 D
    • VOIP: 2422 / 2022

    • Research Interests

      • ● Cell-penetrating peptides
      ● Intracellular bacterial targeting of nanoparticles and peptides
      ● Biodegradable polymers
      ● Antibacterial polymers
      ● Transport Phenomena
      ● Cellular uptake assessment of nanoparticles

    Recent Publications

    1. Prajapati, Deepak G., and Abhijit Mishra. "Long‐term and fast‐bactericidal activity of methacrylamide‐based copolymer for antibiofilm coatings and antibacterial wipes applications." Journal of Applied Polymer Science 141.1 (2024): e54745.
    2. Bhadane, Prathmesh, and Abhijit Mishra. "The effect of Alkali treatment on Pineapple Leaf Fibers (PALF) on the performance of PALF reinforced rice starch biocomposites." Journal of Natural Fibers 19.16 (2022): 14235-14249.
    3. Ratrey, Poonam, Bhaskar Datta, and Abhijit Mishra. "Intracellular bacterial targeting by a thiazolyl benzenesulfonamide and octaarginine peptide complex." ACS Applied Bio Materials 5.7 (2022): 3257-3268.
  • AA
    • img
    • img
    • img
    • img
    • img
    • img
    • img

    Research Description

    Dr. Amit Arora leads the Advanced Materials Processing Research Group at IIT Gandhinagar. The group's primary focus lies in the domain of numerical modelling of welding and joining processes, encompassing additive manufacturing processes of metals/polymers and polymer composites, as well as delving into the complexities of friction stir welding. Our research spans various critical aspects of FSW, including tool wear analysis, numerical modelling of dissimilar friction stir welding, and comprehensive examinations of mechanical and electrochemical properties in friction stir surface composites. Beyond this, the group also works on CALPHAD-based computational alloy design through thermodynamic and kinetic simulation.

    Advanced Materials Processing Research Group (AMPRG)

    PI: Dr. Amit Arora

    • Work Experience:
    • Associate Professor, Materials Engineering
    • Research Assistant Professor, University of North Texas,USA (Jan 2024 –Present)
    • Assistant Professor, Indian Institute of Technology Gandhinagar (Oct 2011 - Jun 2021)
    • Visiting Scholar, University of North Texas, USA (Mar 2014 – Sep 2014)
    • Associate System Engineer, IBM India Pvt. Ltd, Pune (Jun 2005 - Jun 2006)

    • Education:
    • Dual Degree:Indian Institute of Technology, Kharagpur, 2005
    • Ph.D.:The Pennsylvania State University, 2011

    • Contact Details:
    • Email: amitarora -AT- iitgn.ac.in
    • Website: https://amit.people.iitgn.ac.in/
    • Google Scholar: https://scholar.google.com/citations?user=CXme-eAAAAAJ
    • Office: 11/308 B
    • VOIP: 2424

    • Research Interests

      • ● Numerical Modeling of Additive Manufacturing
      ● Modeling of Joining Processes
      ● Friction Stir Welding, Processing and Channeling
      ● Corrosion Studies of Surface Composites
      ● Aluminum Metal Matrix Composites
      ● Discrete Element Modelling
      ● Computational Alloy Design (CALPHAD)

    Recent Publications

    1. Srivastava, Nishkarsh, Amit Kumar Singh, Alok Kumar Kanungo, Amit Arora, Karaigowder Rajan, and Veerasamy Selvakumar. "Comparative microstructural and elemental analysis of iron artefacts from Kaveri valley archaeological sites." Archaeometry 65, no. 6 (2023): 1246-1259.
    2. Sahoo, Sambit, Rajat Mishra, Nishkarsh Srivastava, and Amit Arora. "FEM simulation of pulsed laser welding of high-carbon alloy steel: using different heat source models." Transactions of the Indian Institute of Metals 76, no. 12 (2023): 3421-3427.
    3. Das, Manojit, Arijit Jana, Astha Dixit, Rajat Mishra, Swapan Maity, R. Karthik, Shaik Salam Basha et al. "3D printing of tough nature inspired hierarchical architecture using chicken bone and eggshell biowaste for biomedical applications." Ceramics International 49, no. 17 (2023): 29274-29287.
  • AB
    • img

    Research Description

    Synthesis of new materials is the key to disruptive research and industrial applications. My fortes are (a) synthesis of heavily doped carbon-based and 2D materials by using highly non-equilibrium techniques, (b) structure-property correlations of these novel materials, and (c) manufacturing multifunctional electronic devices using these exciting materials. Highly non-equilibrium synthesis (pulsed laser deposition: PLD and pulsed laser annealing: PLA) can form high-quality thin films and nanoarchitectures of industrial significance. PLA will be used to introduce dopants beyond their thermodynamic solubility limits by solute trapping. In the PLA process, we will melt and subsequently quench the super undercooled state at an ultrafast rate thereby locking excess dopants in the material structure. The heavily doped materials will be integrated to manufacture high-speed multifunctional electronics: memory, spintronics, ferroelectrics, solar cells, sensors, diodes, transistors, and qubits for quantum computing.

    Group Title

    PI: Dr. Anagh Bhaumik

    • Work Experience:
    • Assistant Professor, Assistant Professor, Indian Institute of Technology Gandhinagar (May 2024 to present)
    • TD Module and Integration Yield Engineer, INTEL, USA (Jun 2019 to May 2024)
    • Design Engineer, MECON Limited, INDIA (Jun 2008 - Nov 2012)

    • Education:
    • B.Tech: NIT Rourkela, 2008
    • MS: Missouri State University, USA, 2014
    • Ph.D.: North Carolina State University, USA, 2019

    • Contact Details:
    • Email: anagh.bhaumik -AT- iitgn.ac.in
    • Google Scholar: https://scholar.google.com/citations?user=yTscPS4AAAAJ&hl=en
    • Linkedin: https://www.linkedin.com/in/anagh-bhaumik-ph-d-047a11100/
    • Office: AB 11/305 B

    • Research Interests

      • ● Synthesis of heavily doped carbon-based and 2D materials.
      ● Non-equilibrium synthesis of nanoarchitectures and thin films.
      ● Structure-property correlations.
      ● Manufacturing high-speed multifunctional electronic devices.

    Recent Publications

    1. “Discovery of High-Temperature Superconductivity (Tc= 55 K) in B-Doped Q-Carbon” A. Bhaumik, R. Sachan, S. Gupta, J. Narayan 2017 (ACS Nano, 11, 11915 (2017)).
    2. “High-Temperature Superconductivity in Boron-Doped Q-Carbon” A. Bhaumik, R. Sachan, J. Narayan 2017 (ACS Nano. 11, 5351 (2017)).
    3. “Tunable charge states of nitrogen-vacancy centers in diamond for ultrafast quantum devices” A. Bhaumik, R. Sachan, J. Narayan 2019 (Carbon 142, 662 (2019)).
  • EP
    • img
    • img
    • img
    • img

    Research Description

    Prof. Emila Panda heads the (Opto)electronics and Thin Films Laboratory (OTFL) at IITGN. To this end, her group has been experimentally investigating a range of semiconductor materials for various applications. Both the vacuum and the non-vacuum-based synthesis techniques have been adopted in her work. Moreover, these thin films are being fabricated by varying a range of process conditions, following which several experimental techniques are used to assess their detailed microstructure, optical and electrical properties. Materials that have been investigated in her group are, (Al, Mg, B)-doped ZnO, (Nb, Ta)-doped anatase TiO2 (as transparent conductors (TCO)), ZnO, ZnS, Zn(O)S (as n-type), SnS, Cu2-xS, Cu2SnS3 (as p-type semiconductors). The second focus of the research group is to understand the dry, thermal oxidation of various materials. Here, experimentally, oxide-films are grown by varying process conditions, following which a detailed investigation on the microstructure of these oxide-films are carried out using a range of experimental techniques. Both the thermodynamic and the kinetic approaches of the oxide-film growth are used to understand their microstructure as well as oxide growth kinetics. The investigated research projects under this category are, growth of ultra-thin crystalline and amorphous oxide films due to their thermal oxidation, thermodynamics of interfaces, oxidation of magnetostrictive materials and permanent magnets.

    (Opto)electronics and Thin Films Laboratory (OTFL)

    PI: Dr. Emila Panda

    • Work Experience:
    • Associate Professor, Materials Science & Engineering, IIT Gandhinagar, India, (2016 to present)
    • Assistant Professor, Indian Institute of Technology, Gandhinagar (2011 - Sep 2016)
    • Postdoctoral Researcher, Max Planck Institute of Microstructure Physics, Halle (Saale), Germany (2009 - 2010)
    • Scientist ‘B’, National Metallurgical Laboratory (NML), Council of Scientific and Industrial Research (CSIR), Jamshedpur, India (2004 - 2006)
    • Assistant Manager, KCSSL, Pune, India (2003 - 2004)

    • Education:
    • B.E.: Regional Engineering College, Rourkela, 2000
    • M.Tech: Indian Institute of Technology, Kanpur, 2003
    • Ph.D.: Max Planck Institute for Metals Research and University of Stuttgart, Germany, 2009

    • Contact Details:
    • Email: emila -AT- iitgn.ac.in
    • Website: https://sites.google.com/iitgn.ac.in/otfl/home
    • Office: 11/306 A
    • VOIP: 2421

    • Research Interests

      • ● Electronic materials
      ● Oxidation of magnetic materials
      ● Microstructure evaluation
      ● SIS Devices (Superconductor-Insulator-Superconductor)
      ● Material design for extreme environment
      ● Thermodynamics and kinetics of phase transformation in thin films

    Recent Publications

    1. Ravi Teja Mittireddi, Nisha Hiralal Makani, Ranjan Kumar Singh, Rupak Banerjee and Emila Panda, 2024. Heating/cooling-induced formation, dissociation and phase separation of CuFe2O4 during thermal oxidation of Sm2(Co, Fe, Cu, Zr)17 permanent magnet. Corrosion Science, 227: 111774 (pp. 11).
    2. Rohit Dahule, Chetan C. Singh, Kenta Hongo, Ryo Maezono, and Emila Panda, 2022. Anomalies in the bulk and surface electronic properties of SnS: effects of native defects. Journal of Materials Chemistry C, 10, 5514 - 5525.
    3. Krishna Manwani and Emila Panda, 2021. Thickness induced modifications in the valence, conduction bands and optoelectronic properties of undoped and Nb-doped anatase TiO2 thin films. Materials Science in Semiconductor Processing, 134: 106048 (pp.14).
  • GK
    • img
    • img
    • img
    • img
    • img
    • img
    • img
    • img

    Research Description

    Two of the most compelling problems humans facing today are the lack of clean water and the ever-increasing demand for energy. We are trying to find solutions by designing novel membranes consisting of angstrom-scale channels, which perform selective separation of molecules and ions. The choice of membrane material is driven by aspects such as low cost and also its ability to exhibit novel separation mechanisms that utilize less process energies. Our membrane designs are inspired by nature. We mostly use two-dimensional layered materials for membranes. Our intercalation strategies help us to design novel functional materials for membranes. The membrane fluidic channels are in the form of two-dimensional slits or laminates, nanotubes, and pores. The sizes of these membranes range from mm to inches. We model the atomic processes involved in the separation process using the COMSOL Multiphysics and ANSYS CFD simulation tools. Potential applications of these membranes are desalination, dye separation, isotope separation, fuel cell, energy generation, Li and other metals extraction.
    We also fabricate micron-sized devices using optical lithography and thermal evaporator to understand the fundamentals of the transport processes. The electric field tuning of the transport is a fascinating area that we are pursuing with the aim of achieving fluidic field effect transistors. We have the ability to fabricate heterostructures of two-dimensional materials and are very excited to explore the avenue of twistronics. Our Cryogenic (400 K-1.5 K) facilities allow us to explore the electrical and magnetic transport properties of heterostructures in finding potential topological insulators, Weyl semimetals, topological superconductors, etc.

    2D Material Nanofluidics and Cryogenics Lab

    PI: Dr. Gopinadhan Kalon

    • Work Experience:
    • Associate Professor, Indian Institute of Technology Gandhinagar (Sep 2023 to Present)
    • Assistant Professor, Indian Institute of Technology Gandhinagar (July 2018 to Sep 2023)
    • Marie Curie Fellow, Department of Physics and Astronomy, University of Manchester (2015)
    • Research Scientist (Senior), NUSNNI-NanoCore, National University of Singapore (2013 - 2015)
    • Visiting Scientist, Dept of Physics, University of Manchester (2013)
    • Research Scientist, Dept. of ECE., National Un. Singapore (2011 - 2013)
    • Research Scientist (A), Dept. of ECE, National Un. Singapore (2008 - 2011)
    • Project Scientist, IIT Delhi (2007 - 2008)

    • Education:
    • B.Sc.: Calicut University Kerala, 1997
    • M.Sc.: Calicut University Campus Kerala, 1999
    • M.Tech: IIT Kanpur, 2002
    • Ph.D.: IIT Delhi, 2008

    • Contact Details:
    • Email: prafull.pandey -AT- iitgn.ac.in
    • Group Webpage: https://sites.google.com/iitgn.ac.in/nanofluidicslab
    • Google Scholar: https://scholar.google.com.sg/citations?user=ziD_UGYAAAAJ&hl=en
    • Office: AB 6/314 A
    • VOIP: 2543

    • Research Interests

      • ● Electronic and Membrane Materials
      ● 2D Material Based Nanofluidics & Energy Harvesting
      ● Membrane Science and Technology
      ● Cryogenic properties of Two-dimensional heterostructures

    Recent Publications

    1. L. Saini, S.S. Nemala, A. Rathi, S. Kaushik, G. Kalon, Selective transport of water molecules through interlayer spaces in graphite, Nat. Commun. 13, 498 (2022).
    2. A. Rathi, B. Dhal, S. S. Sarath, G. Kalon, Ion hydration-controlled large osmotic power with arrays of Angstrom scale capillaries of vermiculite, Cell Reports Physical Science 4, 101717 (2023).
    3. A. Rathi, K. Singh, L. Saini, S. Kaushik, B. Dhal, S. Parmar, G. Kalon, Anomalous transport in angstrom-sized membranes with exceptional water flow rates and dye/salt rejections, Materials Today Nano 22, 100328 (2023).
  • PP
    • img

    Research Description

    The primary research thrust revolves around the design of advanced damage-resistant alloys tailored for diverse applications. Specifically, the focus is on the design and optimization of damage resistant superalloys, Cu-based, Al-based, Fe-based alloys, and multicomponent alloys. My research activities are centered on improving the physical understanding of micro mechanisms governing phase transformation, deformation, and damage evolution in these alloy systems. To facilitate this study, I employ state-of-the-art characterization techniques, including in-situ scanning electron microscopy (SEM), transmission electron microscopy (TEM), and channeling contrast imaging.

    Group Title

    PI: Dr. Prafull Pandey

    • Work Experience:
    • Assistant Professor, Indian Institute of Technology Gandhinagar (Dec 2023 - Present)
    • Postdoctoral Associate, Massachusetts Institute of Technology Cambridge (Nov 2021- Oct 2023)
    • Postdoctoral Associate, Indian Institute of Science Bangalore (Sep 2019- Oct 2021)

    • Education:
    • B.Tech: NIT Raipur, 2010
    • ME: IISc Bangalore, 2012
    • Ph.D.: IISc Bangalore, 2019

    • Contact Details:
    • Email: prafull.pandey -AT- iitgn.ac.in
    • Google Scholar: https://scholar.google.co.in/citations?user=lcXtGh0AAAAJ&hl=en
    • Linkedin: https://www.linkedin.com/in/prafull-pandey-91739955/
    • Office: AB 11/308 D
    • VOIP: 2317

    • Research Interests

      • ● Alloy design
      ● High-temperature materials (Co-, Ni- and Fe-based superalloys)
      ● Electron microscopy
      ● Phase transformation
      ● Deformation mechanism

    Recent Publications

    1. S. Kumar, P. Pandey, K. Chattopadhyay, Influence of interfacial and strain energies on γ′ coarsening kinetics in complex concentrated alloys, Materialia, 33(2024), 102018
    2. P. Pandey, M. Heczko, N. Khatavkar, N. Mazumder, A. Sharma, A. Singh. M. J. Mills, K. Chattopadhyay, On the faulting and twinning mediated strengthening and plasticity in a γʹ strengthened CoNi-based superalloy at room temperature, Acta Materialia, 252(2023), 118928
    3. P. Pandey, A. Sawant, N. Baler, S. K. Makineni, K. Chattopadhyay, Effect of Ru addition on γ/γ′ microstructural stability in a low-density CoNi based superalloy, Scripta Materialia, 208 (2022), 114318.
  • PG

    • To be Updated

    Research Description

    Our group mainly focuses on alloy design for structural applications. We take help of conventional melting and electrodeposition for preparing the alloys. The alloys are subjected to thermo-mechanical processes for microstructure engineering. We use advanced microscopy techniques such as XRD/Synchrotron , SEM-EBSD, TEM, APT for detailed microstructure characterization. The mechanical properties of the alloys are studied to understand their dependence on the microstructure. Our group also has interest in in-situ characterization of mechanical properties to capture the correlation with microstructure evolution.

    Group Title

    PI: Dr. Pradipta Ghosh

    • Work Experience:
    • Assistant Professor, Indian Institute of Technology Gandhinagar
    • Postdoctoral Fellow, Lawrence Berkeley National Lab, (Apr 2009 - Sep 2014)

    • Education:
    • BE: NIT Durgapur, 2005
    • ME: IISc Bangalore, 2007
    • Ph.D.: Indian Institute of Science Bangalore, India

    • Contact Details:
    • Email: pradipta.ghosh -AT- iitgn.ac.in
    • Website: https://www.iitgn.ac.in/faculty/mse/fac-pradipta
    • Office: AB 11/305 A
    • VOIP: 2558

    • Research Interests

      • ● Alloy design with conventional melting and Electrodeposition
      ● Thermo-mechanical processing
      ● Mechanical behavior of materials
      ● Microstructure characterization.

    Recent Publications

    1. RT Mathew, S Singam, P Ghosh, SK Masa, MJNV Prasad, The defining role of initial microstructure and processing temperature on microstructural evolution, hardness and tensile response of Al-Mg-Sc-Zr (AA5024) alloy processed by high pressure torsion, J. Alloys Compounds, 901 (2022) 163548
    2. Kapp MW, Renk O, Ghosh P, Leitner T, Yang B, Pippan R, Plastic strain triggers structural instabilities upon cyclic loading in ultrafine-grained nickel, Acta Materialia, 200 (2020) 136-147
    3. Renk O, Ghosh P, Sabat RK, Eckert J, Pippan R, The role of crystallographic texture on mechanically induced grain boundary migration, Acta Materialia, 200 (2020) 404-416
  • RR
    • img
    • img
    • img

    Research Description

    The Computational Molecular Engineering Group (C-MEG) focuses on large-scale atomistic and molecular simulations to uncover novel structure-property relations in materials. A wide variety of materials spanning porous materials, 2D materials, glasses, alloys, natural materials (and their biomimetic counterparts) and polymer nanocomposites are of interest, with the key question on how structure affects the properties at the nanoscale. We probe various properties such as mechanical, thermal, mass transport and chemical reactivity, to name a few. More recently, the C-MEG group has started using AI and ML techniques for materials design and development for various applications.

    Computational Molecular Engineering Group

    PI: Dr. Raghavan Ranganathan

    • Work Experience:
    • Assistant Professor, Indian Institute of Technology Gandhinagar, (July 2019 to present)
    • Postdoctoral Associate, Massachusetts Institute of Technology (Sep 2016 – Apr 2019)

    • Education:
    • B.Tech: Indian Institute of Technology, Madras, 2011
    • Ph.D.: Rensselaer Polytechnic Institute, 2016

    • Contact Details:
    • Email: rraghav -AT- iitgn.ac.in
    • Linkedin: https://www.linkedin.com/in/raghavan-ranganathan-169317ab/
    • Google Scholar: https://scholar.google.co.in/citations?user=TDVXWKMAAAAJ&hl=en
    • Office: AB 11/308 A
    • VOIP: 2557

    • Research Interests

      • ● Atomistic/Molecular simulations of structure-property relations
      ● AI and ML applications in computational materials design
      ● Dynamics of soft matter
      ● Thermodynamics and kinetics of phase transformations in materials
      ● Materials under extreme conditions
      ● Biomimetic approaches for materials design

    Recent Publications

    1. Singh, Param Punj, and Raghavan Ranganathan. "Mechanical and Viscoelastic Properties of Stacked and Grafted Graphene/Graphene Oxide–Polyethylene Nanocomposites: A Coarse-Grained Molecular Dynamics Study." ACS Omega (2024).
    2. Lahkar, Simanta, and Raghavan Ranganathan. "Competing mechanisms govern the thermal rectification behavior in semi-stochastic polycrystalline graphene with graded grain-size distribution." Carbon 218 (2024): 118638.
    3. Singh, Param Punj, and Raghavan Ranganathan. "Superior Protection Conferred by Multi-Layered Graphene–Polyethylene Nanocomposites under Shock Loading." ACS Applied Engineering Materials (2023).
  • SR
    • img
    • img
    • img
    • img
    • img
    • img

    Research Description

    FML is an interdisciplinary research group that focuses on the development of porous materials and surface micro and nano patterns by wet chemistry routes and lithography processes to fabricate liquid repellent surfaces and wear-resistant surfaces. Primarily, both the superhydrophobic and slippery surfaces are being prepared for studying their long-term durability in different weather conditions, wear/scratch resistance and self-healing properties. One of our main visions is to provide innovative solutions for marine/underwater applications, medical industries, food industries, paint industries, sanitation to repel real-life liquids and microorganisms such as bacteria by using Nature Inspired Strategies. We utilize the concepts and first principle models of mass and momentum transport in designing and understanding the underlying dewetting mechanisms and self-healing mechanisms. Typical materials we have been working with include polydimethylsiloxanes (PDMS), high density polyethylene (HDPE), alumina, zirconia, cement and ceramic composites.

    Functional Materials Laboratory (FML)

    PI: Dr. Sriharitha Rowthu

    • Work Experience:
    • Assistant Professor, IIT Gandhinagar, India (Dec 2019-Ongoing)
    • Postdoctoral researcher, Paul Scherrer Institute (PSI), Switzerland (Mar 2017 – Oct 2019)
    • Postdoctoral researcher, Empa, Thun, Switzerland (May 2016 – Sep 2016)

    • Education:
    • Dual Degree (MTech+BTech): IIT Madras, 2011
    • Ph.D.: École polytechnique fédérale de Lausanne (2016)

    • Contact Details:
    • Email: sriharitha.rowthu -AT- iitgn.ac.in
    • Group Webpage: https://www.fml-iitgn.com
    • Google Scholar: https://scholar.google.com/citations?user=UkV-FG0AAAAJ&hl=en
    • Google Linkedin: https://www.linkedin.com/in/functional-materials-laboratory-fml-145127237
    • Office: AB 11/309 B
    • VOIP: 2560

    • Research Interests

      • ● Colloidal processing of ceramics of polymers
      ● Dewetting Surfaces
      ● Surface Micro and Nano Patterning (Lithography)
      ● Tribology of Lubricated Surfaces
      ● Transport Phenomena

    Recent Publications

    1. Sriharitha Rowthu, Srinadh Mattaparthi, Erdem Siringil, Patrik Hoffmann, “Sewage Water-Repellent PDMS and Magnetic Silicone Composites: Lab to Commercialization”, ACS Applied Polymer Materials, 2023, 5, 6161. Featured on journal Cover Page and ACS Headline News.
    2. Srinadh Mattaparthi, Dhrmendra Sablaniya, Srinithi Rajendran, Amit Singh, Sreeram Kalpathy, Sriharitha Rowthu, “Non-toxic Self-cleaning Large Area Cement Blocks Fabrication by Biomimicking Superhydrophobic Periwinkle Flowers”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2022, 647, 129112.
    3. Deepak Prajapati, Sriharitha Rowthu, “Unravelling anisotropic wettability of Banana leaves with water and human urine”, Surfaces and Interfaces, 2021, 29, 101742.
  • SM
    • img
    • img
    • img

    Research Description

    Bio-Nanomaterials Group (BNMG) is an interdisciplinary research group, led by Prof. Superb Misra, which focuses on the application of materials science for biological systems. BNMG is conducting research on exploiting the uniqueness of engineered nanomaterials for use in biomedical applications (guided regeneration, nanomedicine). In addition, research activities are also directed towards understanding the intrinsic properties of novel materials and using them to get a predictive biological impact, for cellular and environmental research.

    Bio-Nanomaterials Group (BNMG)

    PI: Dr. Superb Misra

    • Work Experience:
    • Associate Professor, Materials Engineering
    • Assistant Professor, Indian Institute of Technology Gandhinagar
    • Postdoctoral Researcher, Natural History Museum, London
    • Postdoctoral Researcher, University of Birmingham, UK

    • Education:
    • BE: The University of Manchester, UK, 2004
    • Ph.D.: Imperial College London, 2007

    • Contact Details:
    • Email: smisra -AT- iitgn.ac.in
    • Website: BNMG Lab
    • Google Scholar: https://scholar.google.com.ni/citations?user=45h0aFAAAAAJ&hl=en
    • Office: AB 11/306 B
    • VOIP: 2467

    • Research Interests

      • ● Biomaterials and Tissue Engineering
      ● Metal Oxide Frameworks (MOFs)
      ● Nanomaterials
      ● Nanotoxicology
      ● Materials safety

    Recent Publications

    1. Singh S et al. Enhanced therapeutic action of Trastuzumab loaded ZnxMn1−xFe2O4nanoparticles using a pre-treatment step for hyperthermia treatment of HER2+ breast cancer. Colloids and Surfaces B: Biointerfaces. 2023. 232, 113579
    2. Malvi B, et al. Development of isotopically labelled 65Cu embedded PMMA-65CuO nanocomposites for detection and quantification of PMMA bone cement degradation at trace levels. Materials Today: Comm. 2023. 36, 106849.
    3. S Singh, et al. Synergistic Effect of Yb3+, Tm3+, Nd3+ Doped NaYF4 Nanoparticles and MoS2 Nanosheets for Enhanced Photocatalytic Dye Degradation under Visible Light. ACS App. Nano Mater. 2023, 6,10441.